SBIG-STL to Vixen VC200L Adapter 

 

stl_adapt_0.jpg (65259 bytes)

 

stl_adapt_2.jpg (47620 bytes)
VC200L back end with Robofocus and 60 mm focuser tube extender Rings used: Vixen Focal Reducer adapter (only for f/6.4), Vixen wide T ring front part and custom adapter for SBIG STL (click here to see it)
 

stl_adapt_1.jpg (67890 bytes)

  

stl_adapt_3.jpg (51807 bytes)
Custom adapter on STL Vixen widet T part and custom adapter allow for camera rotation
for prime focus imaging at f/9 a 60 mm diameter extender is required

 

stl_adapt_4.jpg (63905 bytes)

 

stl_adapt_5.jpg (61542 bytes)
Focal reducer and focal reducer ring adapter for f/6.4 imaging The complete setup, note that at f/6.4 the black 60 mm tube extender shonw here is not used

 

stl_adapt_7.jpg (72685 bytes)

 

stl_adapt_6.jpg (77567 bytes)

 

ccdins_vc200l-stl_custom_adap_75.jpg (54263 bytes)

 

ccdins_vc200l-stl_3d_custom_adap-75.jpg (54847 bytes)

© Copyright 2006 by Antonio Fernández. All rights reserved. Contents of these pages, including photos and text, may not be reproduced, published,
copied or transmitted in any form without written permission of the author.

hit tracker