Collimatore per
SCT e Newton:
Ho pensato di fare una
modifica ad una idea di "collimatore fai da
te" vista in internet e a mio avviso molto efficace non che di
sicuro paragonabile a quelli in commercio ma dal costo decisamente
superiore (ne ho visti anche a 165 euro!!)
L'idea è semplice: come fonte di
luce ho usato una pila dotata di un led bianco ad altissima intensità che si trova
ormai normalmente nelle bancarelle dei mercati o presso rivenditori
di materiale elettrico e dal costo di 5 euro !! (unica spesa
fatta). Emette una luce notevole e, cosa non indifferente, funzionando a
sfregamento (senza alimentazione di pile) è rimasta accesa per
più di un'ora nonostante tutta la luce che produceva permettendo un lasso di tempo più che sufficiente per collimare
egregiamente un'ottica a riflessione.
Successivamente ho ritagliato da un semplice cartoncino bianco
una strisciolina resa poi cilindrica e adattata al diametro
della pila dal lato del led, dopo di che è
stato praticato su un foglio di alluminio (normalissimo cuki da cucina) un forellino prodotto da un
sottilissimo filo ricavato da un comune cavetto elettrico.
Facendo sporgere il filo di poco
dalla guaina di plastica è risultato sufficientemente rigido
da bucare facilmente l'alluminio. Il diametro del foro così ottenuto
dovrebbe essere vicino ai 50 micron (mezzo decimo di millimetro), che visto da
una distanza ottimale di 50 metri risulta praticamente
puntiforme.
Ho poi steso il pezzetto
di alluminio con il forellino centralmente su un lato del cilindro di
cartoncino ed il tutto è stato poi fissato con un paio di giri di nastro
isolante.
Infine ho inserito il cappuccio
cilindrico così prodotto sulla pila ed acceso il led;
risultato: la luce emessa dal forellino è risultata
potentissima e perfettamente puntiforme, più che sufficiente per la
collimazione di un qualsiasi riflettore, con centriche molto nitide e
contrastate... non so se funziona anche con un rifrattore ma conto
di provarlo al più presto !
Ovviamente ognuno può divertirsi a
perfezionare l'apparato modificandolo o adattandolo alle proprie esigenze ma vi
assicuro che già così funziona egregiamente !!
Quando le giornate e/o le serate
non sono utilizzabili a fini osservativi o fotografici divertitevi anche voi
con un pò di "fai da te"....
a volte da parecchie soddisfazioni (e fa pure risparmiare) :-)))
Collimator for SCT and Newton: I have thought about making a change to an
idea of "collimator you do from you" sees not in internet and to my
notice a lot of effectiveness that of sure comparable to those in commerce but
from the superior cost decidedly (I have also seen to 165 of it European!!)
Idea is simple: how source of light I have used a
battery endowed with a white led to high-intensities that are normally found by
now in the stands of the markets or near retailers of electric material and
from the European cost of 5!! (only done expense). it Sends forth a notable
light and, non indifferent thing, working to rubbing (without feeding of
batteries) you/he/she has remained turned on for more than a hour despite the
whole light that produced allowing a weary of enough time to dearly coincide a
reflection optics.
Subsequently I have cut out from a simple white
cardboard made then cylindrical and
suited for the diameter of the battery by the side of the led, after that
you/he/she has been practiced on an aluminum sheet
(normal cuki from kitchen) a hole produced by a thin
thread drawn by a common electric cavetto.
Making to stick out the thread of few from the plastic
scabbard sufficiently results rigid to easily puncture the aluminum.
The diameter of the hole so gotten you/he/she should be next to the 50 microns
(mean tenth of millimeter), that seen by an optimal
distance of 50 meters hole it results practically. I have centrally stretched
then the aluminum bit with the forellino
on a side of the cylinder of cardboard and the everything you/he/she has been
fixed then with a pair of turns of insulating ribbon. I have finally inserted the cylindrical hood
so product on the battery and turned on the led; result: the light sent forth
by the hole results powerful and perfectly puntiforme,
enough for the coincidence of an any reflector, with very clear centriche and oppose... I don't know if also works with a
refractor but I count to try him/it as soon as possible! Obviously each can
have a good time him to improve the apparatus modifying him/it or suiting
him/it for his/her own demands but I assure you that already so dearly
works!!
When the days e/o the evenings are not usable to thin
observed you or photographic also had a good time you you
with a pò of "you do from you".... at times
from quite a lot satisfactions (and it also makes to save): -)))
Immagine sotto: notare il forellino evidenziato dalla
freccetta nera e vicino al puntino nero sull'alluminio prodotto per riferimento