yenship

Membre
  • Compteur de contenus

    627
  • Inscription

  • Dernière visite

  • Last Connexion

    Soon available - 47725

Messages posté(e)s par yenship


  1. Bonjour,

     

    à tous après une longue période de confinement ne permettant pas de voir le jour, enfin je veux dire la nuit la plutôt :) j'ai pu ressortir lunette et faire quelques objets du printemps, donc si joint la chaîne de Markarian ainsi  que Messier 3 en passant :

     

    - Monture : Takahashi Temma 2M
    - Imageur : Canon eos 7D mark II
    - GOTO : Skybt + Skysafari Pro 5 
    - Instruments : TS 72/432 PHOTOLINE APO DOUBLET

    - Autoguidage : Lacerta Mgen II
    - Traitement : SIRIL 

    - Exposition : Markarian : 39x90s et Messier 3 10x90s, le tout à 1000 Iso avec 21 Darks, Flats et offsets

     

    Jpeg à 71%

     

     

    Markarian_Finale2.thumb.jpg.2c54125403aa012860fdd137cdc17b6e.jpg

     

    Jpeg à 98%

     

     

    M3_astro2.thumb.jpg.51d683734802c52b241617f3423d6adb.jpg

     

    Bon Ciel !

    • J'aime 7

  2. Merci petit ours pour la traduction et lyl pour le lien mais je connaissais déjà aussi tout ça et la version de la lacerta que j'ai c'est la MGEN II :(, la doc que j’essaye de comprendre c'est celle-là sur ce lien :

     

    https://nimax-img.de/Produktdownloads/46263_2_Anleitung.pdf

     

    5.1.10.2.2 Polar alignment screen To set or make the mount’s polar alignment more accuate there is a method called “Declination drift” or “Scheiner” method. Using this screen’s functions You are able to do the required measurements and reduce Your polar misalignment. In brief about the polar misalignment error and the method: In the case that the celestial polar axis (pole) is equal to the mount’s RA axis, Your pole is precisely aligned. Any star in the telescope’s view will stay at the same DEC position for any long time. (Nowt considering the air refraction etc.)

     

    If Your pole is misaligned (ie. Some (say X) arcminutes off from the pole), a star on the celestial equator in the telescope’s view will move on a circle shape (per day), which’s radius is equal to the polar misalignment, X. So You measure these movements close to the celestial equator and finetune the mount in Alt.-Az. to reduce the polar misalignment error. The method has two types of measuring, when we want to know the vertical (altitude) component of the error or the horizontal (azimuth) one. So we correct on the mount up/down or left/right respectively.

     

    The user notes the amount of movement after every modification and measure to know how many to turn the knobs etc. to correct for a given arcminute value. First, the horizontal error is measured and finetuned until it reches near zero or can’t be set lower. Then the same is done for the vertical error. Iterating this two steps will reduce polar aligment error down to the mount’s limit.

     

    At Calibration, the user must give what axis he wants to use. If DEC is selected, DEC must be moved off from the visible pole. For mounts having only RA axis, two options are available, depending on if the guider’s optics has a mirrored image or not. After selecting the proper one (see later), the calibration starts and the user must follow the instructions. The direction buttons can be used to move the mount (with the autoguider signals) but be sure that the mount goes to the proper direction and not to the opposite.

     

    For RA options, the proper direction is when the tracking is stopped or slowed down. In short words, use “with RA inv.” option only if:  there is a diagonal mirror in the guiding system (ie. for refractors)  using an off-axis guider (ie. for Newtonians)  any other case where the image is mirrored. (An odd number of mirrors in the optical system produces this.) Elapsed time is displayed during a measurement (- 0:00 is displayed until the first star position -), which can be cancelled by pressing ESC any time: in the first 5 seconds (or if less than 2 star position got yet) the measurement is cancelled and old error stays displayed. Else, a new polar misalignment drift value is calculated. This calculation may need some seconds if there is a huge amount of data (high frame rate for long time).

     

    (Processing speed is about 1k data/star points per second.) If there is a new/previous error calculated, the right pole’s position (to the current one) is displayed at the right bottom of the screen within an inverse box. The error unit is arcminutes. The direction tells where the axis (intersecting the the ‘sky hemisphere’) should move if You are facing the pole. For example if You are on the northern hemisphere, “Right” means that the celestial pole is to the right (towards east) from Your mount’s current axis, so You should turn the mount azimut clockwise. “Left” means the opposite. “Up” and “Down” is implicitly similar for the altitude.

     

     De ce que je comprends on fait la calibration soit en DEC soit en RA (pas les deux ?), selon l'étoile et le choix de la calibration, l'instrument va demander de bouger l'étoile soit vers l'est soit vers le sud et ensuite mesurer l'écart de la polaire à partir de ces données, écart qui sera corrigé en bougeant les axes de latitude et d'azimut ?

     

    J'essaye de comprendre si le choix de l'étoiles doit être spécifique ou non car rien ne l'y indique.


  3. Bonjour,

     

    suite à la merveilleuse nuit du mardi 21/01 j'ai pu faire quelques images sympathique :)

     

    - Monture : Takahashi Temma 2M
    - Imageur : Canon eos 7D mark II
    - GOTO : Skybt + Skysafari Pro 5 
    - Instruments : TS 72/432 PHOTOLINE APO DOUBLET

    - Autoguidage : Lacerta Mgen II
    - Traitement : Deepskystacker, Photoshop et SIRIL ( les trois se complètent à merveille )

    - Exposition : 59 poses  à 1000  iso +15 darks +15 offset et 0 flats

    - Lieu : Orsonville

     

    Panstarrs Mag 9.3 :

    ===============

     

    comete2.thumb.jpg.d7914b4e086802b1fdc6c44b546b70ce.jpg

     

     

    M46-M47 avec NGC 2438 :

    ======================

     

    m46-m47.thumb.jpg.d2178f199af14e10f31c31b56ba6d60d.jpg

     

     

    Comme c'est de saison, j'ai  retraité une image de 2108 d'Orion prise dans le Morvan, je trouve que cet fois-ci e traitement est plus équilibré en couleur et moins terne  que la précédente : 

     

     

    orion.thumb.jpg.aaac4068b435d54e69ca5dbf6cb621db.jpg

     

    Le lien astrobin pour la full :

     

    https://www.astrobin.com/full/gaia1z/0/

     

    Bon ciel !

     

     

    • J'aime 8

  4. Concernant la qualité, c'est aussi relatif, en observation oui ça joue pas mal un apo sera toujours mieux qu'un achromatique , après pour de la photo ton image final dépend du traitement, du bruits sur l'image et du suivie, donc au final la qualité de ton image dépendra aussi de ces paramètres ( une étoile sera toujours ronde, les détails d'une nébuleuse à 400 iso ne sera pas la même qu'à 1600 iso) même si de base il vaut mieux avoir le top du top.


  5. Pourquoi ne serait-il pas judicieux de le faire ? D'autant plus que côté sensibilité le 7D Mark II est plutôt bien placé :) ( j'en ai un), le seul truc où je pense qu'il ne faudrait pas le faire c'est parce que c'est un belle APN bien pensé pour les photos de sports,  diurne, après si ton objectif c'est de faire que de l'astro il n'y a pas plus de restriction que cela. Pour ma part j'achèterai un autre appareil d'occase pour le faire et je garderais mon 7D MarK II pour son utilisation de tout les jours :).


  6. Oui les zooms sont à proscrire, il faut prendre des focales fixes pour la qualité optimum, ensuite tout dépend aussi de la qualité des verres du téléobjectif, pour moi le canon 400mm F/5.6 est une bonne référence (Une lentille UD et une lentille Super UD), le canon 300mm F/4 est un peu en retrait par rapport à son grand frère. Ensuite pour la mise au point je comprends pas trop les soucis que vous avez, il suffit d'utiliser le live view avec un masque de batinov,  voir cet exemple récent :

     

     

    Il est clair que le nec plus ulltra ce serait d'avoir un canon 400mm F/2.8 :)