a722 0 Posté(e) 30 juin 2009 Salut,Sur le forum de qhy j'ai posté un message pour avoir des infos sur les caractéristiques de la qhy9. Terry Lovejoy a mesuré les caractéristiques de la sienne et ça donne ça :Test Software Ascom Driver 1.0.0.10/CCDCap 2.50B unless otherwise notedGain at 0% Setting 0.62 e-/ADUGain at 100% Setting 0.13 e-/ADURead Noise 8.5 e- RMS (overscan - measured in EZCAP1.3) 11 e- RMS (Active Sensor, maximum gain) 12 e- RMS (Active Sensor, minimum gain)Readout Banding 1.3e- Peak to Peak (2% readout noise)**Dark Current 0.09 e-/pixel/sec @ 5C 0.01 e-/pixel/second @ -10C 22 hotpixels @ 5C 8 hotpixels @ -10C 2 hotpixels @ -25CLinearity Excellent (refer graph)* From examining actual images in EZCap** Some minor horizontal banding was noticed in highly stretched dark frames*** Based on pixels that have attained a value of 25,500 e- (point at which signal becomes non-linear)Voici le lien pour le message en question : http://qhyccd.com/ccdbbs/index.php?PHPSESSID=977b381adf3a777ef35fad256e04e18a&topic=1477.0 ça à l'air pas mal non ? Partager ce message Lien à poster Partager sur d’autres sites