chonum

Encore un bon seeing pour du HA

Messages recommandés

Salut, pourvu que cela dure !
Encore la Basler 1920-155um et le HaT + étalon PST.
En visuel avec le Daystar c'était grandiose...

Full : http://astrochonum.com/Astro/solaire/4-Octobre-2014-IMX174-HA/tache-2-full.jpg

Full : http://astrochonum.com/Astro/solaire/4-Octobre-2014-IMX174-HA/serie-2-full.jpg

Frédéric

[Ce message a été modifié par chonum (Édité le 04-10-2014).]

Partager ce message


Lien à poster
Partager sur d’autres sites
Salut.
Très très fin comme résolution Fred.
Je n'y suis pas encore.
Question d'échantillonage ?
Marc.

Partager ce message


Lien à poster
Partager sur d’autres sites
Je suis plus bas que toi, avec la distance au réducteur qui influence, c'est difficile à dire exactement...
En tout cas tu es en net progrès.

Partager ce message


Lien à poster
Partager sur d’autres sites

je dirais même que c'est excellent! quelle finesse! bravo fred!
polo

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello, Chonum

In my sincere opinion, most of your images are over processed.
As I can see, your etalon, probably can't allows a better resolution corresponding for a value <1 Angstrom band-pass.

On this situation, forcing by processing to a better sharp is going to noise, over contrast (over lightened area) and interrupted segments representing plasma disposed along magnetic lines.

On the other hand, your capture technique seems to be not suitable as I see. If you shot long avi's or long strings of frames, you are in danger to stack frames where the filaments (long or short) already moved (during capture) and the stacked result will appear with smeared areas, whatever I already saw at your last (above) pictures.
The main rule, if the capture is rich enough in information (good seeing/transparency) without possible moved filaments inside, is to not over process more than the band-pass and more than the noise allow you.
But the pictures remains artistically impressive and I appreciate your efforts.

Regards,

Gabriel

Partager ce message


Lien à poster
Partager sur d’autres sites
Ah oui, là ça cause bien quand même. On sent le diamètre qui parle.
Bravo, ce sont de très belles images.

Au fait, merci pour le tuyau pour le télécentric, c'est génial, il m'insère même un correcteur de coma dans l'optique ! Cela va au delà de mes espérances.

Jean-Christophe

Partager ce message


Lien à poster
Partager sur d’autres sites
Hello Chonum,


Sorry but in my opinion your images are over processed and noisy.
Probably the etalon of your scope cant work for a shorter band than 1 Angstrom as I can see, so, pushing with processing the artifacts and the noise are filling the picture. Also, pushing with the processing, the tiny filament's lines become interrupted.

I think also that you captured and stacked frames where some filaments already appear as moved, so the stacking will result in some smeared area. That usually is happening when you shot too much frames and the Chromosphere is dynamically very active.

Finally, the pictures remain impressive enough.

Regards,

Gabriel

[Ce message a été modifié par uranus7 (Édité le 26-11-2014).]

Partager ce message


Lien à poster
Partager sur d’autres sites
Bonjour,
Je trouve ces images très bien détaillées, c'est impressionnant.
Bravo.

Jérémy

Partager ce message


Lien à poster
Partager sur d’autres sites
C'est énorme de pouvoir sortir des truc comme ça avec un soleil à -21° de déclinaison! Et puis ça fait plaisir de se dire que quelque part en France on aperçoit encore le soleil

a+

Simon

Partager ce message


Lien à poster
Partager sur d’autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant